Specs of this rom

• NewMIUI V4
• Google Play Music
• Ads free
• Gingerbread version

Disclaimer: This is to inform all the readers of this post that Nor the developer nor the website owner nor the person who has posted this article will not be responsible if your device or mobile get bricked during this installation update we do not bear any responsibility but we will try our level best to rectify your error.

Prerequisite:

• These steps that we are giving are only for Motorola Defy you cannot use these steps on any other device, if you will use then your device or mobile will get bricked.
• The first thing you have to make sure is that your phone has to be charged at least 80 to 85% before you are doing this update or installation  otherwise your phone will switch off in between the installation or this update and this can cause a serious harm to yourdevice or mobile
• The second thing you have to make sure is to take a backup of all files, music, videos, photos, apps, call log, messages etc. in short take up the back up of whole Micro SD card.
• The third thing you have to make sure is to make a tick on enable USB Debugging on your Device or Mobile. If you don’t know how to Enable the USB Debugging follow these simple steps- Settings >> Applications >> Development >> USB debugging by following these steps your USB debugging would get enable.
• The fourth thing you have to make sure is to disable all the antivirus and kies because they willclutter in this installation or update.
• The fifth thing you have to make sure is all required drivers has to installed on your computeror laptop.
• By doing these five requirements correctly  you can go-ahead for the steps to install or update your device.

Steps:

• You have to download the Pikachu Custom rom from the given lnk
• Then you have to connect your device with the Computer only by using Original USB cable.
• Now move the downloaded file to the SD card
• Switch off the phone and you have to enter in the Recovery mode
• You can Enter recovery mode by pressing the Volume up +down key with power button continuously
• You can use the power button to choose the files and volume keys to see the files.
• Choose ‘Install ZIP from SD card’ and then select ‘Choose ZIP from SD card’ Select the file” “Pikachu Custom rom”
• After selecting the file you will see a message “reboot ”

Update Galaxy S Advance I9070 with Official XXLE2 Gingerbread 2.3.6 Firmware

Disclaimer: This is to inform all the readers of this post that Nor the developer nor the website owner nor the person who has posted this article will not be responsible if your device or mobile get bricked during this installation update we do not bear any responsibility but we will try our level best to rectify your error.

Prerequisite:

• These steps that we are giving are only for Samsung Galaxy S advance you cannot use these steps on any other device, if you will use then your device or mobile will get bricked.
• The first thing you have to make sure is that your phone has to be charged at least 80 to 85% before you are doing this update or installation  otherwise your phone will switch off in between the installation or this update and this can cause a serious harm to yourdevice or mobile
• The second thing you have to make sure is to take a backup of all files, music, videos, photos, apps, call log, messages etc. in short take up the back up of whole Micro SD card.
• The third thing you have to make sure is to make a tick on enable USB Debugging on your Device or Mobile. If you don’t know how to Enable the USB Debugging follow these simple steps- Settings >> Applications >> Development >> USB debugging by following these steps your USB debugging would get enable.
• The fourth thing you have to make sure is to disable all the antivirus and kies because they willclutter in this installation or update.
• The fifth thing you have to make sure is all required drivers has to installed on your computeror laptop.
• By doing these five requirements correctly  you can go-ahead for the steps to install or update your device.

Steps:

• First you have to download the Odin and XXLE2 Gingerbread 2/3/6 firmware Package to your computer. After downloading , you have to extract these packages and then open Odin in your computer.

• After doing the first step, you have to switch to the download mode in your Galaxy ADVANCE, you can switch to the download mode in your smartphone by pressing the volume down key, center button, holding both continuously press the Power button after which you will be able to see a green robot showing you have entered the Download Mode.

• Now, what you have to do is to connect your cell phone to the computer and open the Odin and ensure that the ID:COM section has turned yellow.

Note: If you are facing problem with the ID:COM section not turning yellow, you have to check with the two things that have been mentioned below.

• The USB Drivers in your computer must be installed & then you have to go to “Settings > Wireless & Network > USB Settings.”

• You have to ensure that the “Samsung Kies” option has been checked by you before connecting the device to the computer.

• Now open Odin and click on “PDA” to select the PDA file which you got while extracting the file and now you can proceed by clicking on “Start” to start the firmware update. Wait till the update is being applied successfully, when it will be done , the device will reboot itself.

• To check whether the update has been successful or not, you can check it from the path “Applications > Settings > About Phone” where you will got to know about the firmware version that will be XXLE2 2.3.6 Firmware.

• If any problem like force close error is faced by you, then you are in a need to delete the data in recovery mode

• You can do this by going to the recovery mode, then select the factory reset/wipe data and you surely have to select Wipe Cache partition and you just have to reboot your device by selecting reboot now by pressing the Volume rocker keys.

A cheeky delight for you and your partner

The light-hearted banter is particularly meant for couple and that too the ones to include
the ‘adult’ bracket. With its lively blend of fun and sex; you are required to carry out sexual
tasks. Obviously, the score settlement boils down to who gets ahead of the other in fray, in the
performance of the so called tasks. The title of the game has an interesting tale to relate, rather
an interesting question to pose. It asks if both of you are well prepared for the task ahead.

The very act of it

You all are well aware of the obvious deals of sexual consummation. It is little surprising thus
that you have a game planned out on it. The game puts your skill to test with specialized focus
on that. The game with its algorithm is also focused on finding your soul mate, rather your ideal
sexual partner. You are required to enter the respective names and the rest will be ensured by
the logical competency of Android.

Game plan to add to your sexual prowess

The logical range of Android is such that it can add a chisel to your sexual prowess. In case you
and your partner are down in the dump; you can be on an enlivening by this fun application.
The game helps you add to the deals of passion besides counting lots on scores of intimacy.

Fun games for couple

You can customize this application according to personal preference. The fun games are
ultimately intended on improving the vibes between couples. The application comes with a
questionnaire. Again, the questionnaire provides the test basis for your knowledge of your
partner. For a hotly vibrant relationship with touches of glowing passion; the fun games count
amongst some of the apt examples. It also has a package of suggestion to offer.

Application for avoiding some of the common glitches

Again the application comes as a suggestion package, helping you avoid common sexual
glitches. There is a specialized type meant for women. Even if you are a man it would be of
some relevance knowing the glitches typical of your feminine counterparts. It is essentially

oriented towards improving your knowhow on the practical aspects of sex.

Sex game for mutual rating

The application is based on many schemas and you can customize as many as you choose to.
Each and every deal of this application has a specific time limit to follow. The game gives you
the prized occasion to rate your better half.

Application on foreplay

By means of this application, you are supposed to go through a series of tasks. All you need to
do is set the dice on roll. The game gets set for the go to have your partner titillated.

Author Bio:

Written by Raj from Singaporean web design company that specializes in offering web designing and application development solutions.

Disclaimer: This is to inform all the readers of this post that Nor the developer nor the website owner nor the person who has posted this article will not be responsible if your device or mobile get bricked during this installation update we do not bear any responsibility but we will try our level best to rectify your error.

Pre-requisite to Update Galaxy ACE S5830 With Galaxy S3 Firmware 

• These steps that we are giving are only for Galaxy ACE S5830 you cannot use these steps on any other device, if you will use then your device or mobile will get bricked.
• The first thing you have to make sure is that your phone has to be charged at least 80 to 85% before you are doing this update or installation  otherwise your phone will switch off in between the installation or this update and this can cause a serious harm to yourdevice or mobile
• The second thing you have to make sure is to take a backup of all files, music, videos, photos, apps, call log, messages etc. in short take up the back up of whole Micro SD card.
• The third thing you have to make sure is to make a tick on enable USB Debugging on your Device or Mobile. If you don’t know how to Enable the USB Debugging follow these simple steps- Settings >> Applications >> Development >> USB debugging by following these steps your USB debugging would get enable.
• The fourth thing you have to make sure is to disable all the antivirus and kies because they willclutter in this installation or update.
• The fifth thing you have to make sure is all required drivers has to installed on your computeror laptop.
• By doing these five requirements correctly  you can go-ahead for the steps to install or update your device.

Steps To Update Galaxy ACE S5830 With Galaxy S3 Firmware

• Download custom ROM  for Galaxy ACE S5830 directly to your computer from here .
• By using USB cable transfer all downloaded files to your device .
• After that disconnect your device from PC.
• Now enter to the recovery mode .
• After that choose zip file and install it wait for 4-7 minutes for installation .
• After it is done, select the option of ‘+++Go back+++’ and then reboot your device .

Hurrah!! you have now learnt Update Galaxy ACE S5830 With Galaxy S3 Firmware

Disclaimer: This is to inform all the readers of this post that Nor the developer nor the website owner nor the person who has posted this article will not be responsible if your device or mobile get bricked during this installation update we do not bear any responsibility but we will try our level best to rectify your error.

Pre-requisite to Root LG Optimus Slider .

• These steps that we are giving are only for LG Optimus Slider you cannot use these steps on any other device, if you will use then your device or mobile will get bricked.
• The first thing you have to make sure is that your phone has to be charged at least 80 to 85% before you are doing this update or installation  otherwise your phone will switch off in between the installation or this update and this can cause a serious harm to yourdevice or mobile
• The second thing you have to make sure is to take a backup of all files, music, videos, photos, apps, call log, messages etc. in short take up the back up of whole Micro SD card.
• The third thing you have to make sure is to make a tick on enable USB Debugging on your Device or Mobile. If you don’t know how to Enable the USB Debugging follow these simple steps- Settings >> Applications >> Development >> USB debugging by following these steps your USB debugging would get enable.
• The fourth thing you have to make sure is to disable all the antivirus and kies because they willclutter in this installation or update.
• The fifth thing you have to make sure is all required drivers has to installed on your computeror laptop.
• By doing these five requirements correctly  you can go-ahead for the steps to install or update your device.

Steps To Root LG Optimus Slider

• Download LG esteem file from here directly to your computer from here .
• Extract all files and transfer all downloaded files to your device by using USB cable .
• Disconnect your device when above process done.
• Now enter to the recovery mode .
• After doing above process  select “install zip from sd card” > “choose zip from sd card” wait for4-7 minutes .
• When above process done you will see the button ++++Go Back++++ select it and then reboot your phone.

Hurrah !! You have successfully Rooted LG Optimus Slider

Disclaimer: This is to inform all the readers of this post that Nor the developer nor the website owner nor the person who has posted this article will not be responsible if your device or mobile get bricked during this installation update we do not bear any responsibility but we will try our level best to rectify your error.

Pre-requisite to Update Galaxy S GT I9000 With f4K Mod ICS 4.0.4 Custom Firmware 

• These steps that we are giving are only for Galaxy S GT I9000 you cannot use these steps on any other device, if you will use then your device or mobile will get bricked.
• The first thing you have to make sure is that your phone has to be charged at least 80 to 85% before you are doing this update or installation  otherwise your phone will switch off in between the installation or this update and this can cause a serious harm to yourdevice or mobile
• The second thing you have to make sure is to take a backup of all files, music, videos, photos, apps, call log, messages etc. in short take up the back up of whole Micro SD card.
• The third thing you have to make sure is to make a tick on enable USB Debugging on your Device or Mobile. If you don’t know how to Enable the USB Debugging follow these simple steps- Settings >> Applications >> Development >> USB debugging by following these steps your USB debugging would get enable.
• The fourth thing you have to make sure is to disable all the antivirus and kies because they willclutter in this installation or update.
• The fifth thing you have to make sure is all required drivers has to installed on your computeror laptop.
• By doing these five requirements correctly  you can go-ahead for the steps to install or update your device.

Steps To Update Galaxy S GT I9000 With f4K Mod ICS 4.0.4 Custom Firmware

• Download custom ICS 4.0.4 Firmware in your computer .
• By using USB Cable transfer all downloaded files to your Galaxy S GT I9000 .
• Disconnect Galaxy S GT I9000 from your computer .
• Now enter to the recovery mode .
• After doing above process  select “install zip from sd card” > “choose zip from sd card” wait for 4-7 minutes .
• When above process done you will see the button ++++Go Back++++ select it and then reboot your phone.

Hurrah !! You have successfully updated Galaxy S GT I9000 With f4K Mod ICS 4.0.4 Custom Firmware

Disclaimer : Go to the official site of  unrevoked  and install the hboot_driver_install in your PC .  Remember  that HTC Incredible already rooted . This is to inform all the readers of this post that Nor the developer nor the website owner nor the person who has posted this article will not be responsible if your device or mobile get bricked during this installation update we do not bear any responsibility but we will try our level best to rectify your error.

Pre-requisite to Update ICS 4.0 Based AOKP Firmware on HTC Incredible 

• These steps that we are giving are only for HTC Incredible you cannot use these steps on any other device, if you will use then your device or mobile will get bricked.
• The first thing you have to make sure is that your phone has to be charged at least 80 to 85% before you are doing this update or installation  otherwise your phone will switch off in between the installation or this update and this can cause a serious harm to yourdevice or mobile
• The second thing you have to make sure is to take a backup of all files, music, videos, photos, apps, call log, messages etc. in short take up the back up of whole Micro SD card.
• The third thing you have to make sure is to make a tick on enable USB Debugging on your Device or Mobile. If you don’t know how to Enable the USB Debugging follow these simple steps- Settings >> Applications >> Development >> USB debugging by following these steps your USB debugging would get enable.
• The fourth thing you have to make sure is to disable all the antivirus and kies because they willclutter in this installation or update.
• The fifth thing you have to make sure is all required drivers has to installed on your computeror laptop.
• By doing these five requirements correctly  you can go-ahead for the steps to install or update your device.

Steps to Update ICS 4.0 Based AOKP Firmware on HTC Incredible

• Download ICS 4.0 Based AOKP Firmware and package of Google application from here.
• By using USB cable transfer all downloaded files to your device .
• Disconnect your device from computer .
• Enter to the  mode of boot loader by selecting option  Volume Down + Power button . After that enter into recovery mode  .
• select zip file install it wait 4-7 to finish the installation .
•  After that u will see  the button ++++Go Back++++ select it and then reboot your phone .

Hurrah!! you have successfully Update ICS 4.0 Based AOKP Firmware on HTC Incredible.

Disclaimer: This is to inform all the readers of this post that Nor the developer nor the website owner nor the person who has posted this article will not be responsible if your device or mobile get bricked during this installation update we do not bear any responsibility but we will try our level best to rectify your error.

Pre-requisite to Update Galaxy S II GT I9100 With Pure Look S3 Custom ROM Firmware

• These steps that we are giving are only for Galaxy S II GT I9100 you cannot use these steps on any other device, if you will use then your device or mobile will get bricked.
• The first thing you have to make sure is that your phone has to be charged at least 80 to 85% before you are doing this update or installation  otherwise your phone will switch off in between the installation or this update and this can cause a serious harm to yourdevice or mobile
• The second thing you have to make sure is to take a backup of all files, music, videos, photos, apps, call log, messages etc. in short take up the back up of whole Micro SD card.
• The third thing you have to make sure is to make a tick on enable USB Debugging on your Device or Mobile. If you don’t know how to Enable the USB Debugging follow these simple steps- Settings >> Applications >> Development >> USB debugging by following these steps your USB debugging would get enable.
• The fourth thing you have to make sure is to disable all the antivirus and kies because they willclutter in this installation or update.
• The fifth thing you have to make sure is all required drivers has to installed on your computeror laptop.
• By doing these five requirements correctly  you can go-ahead for the steps to install or update your device

Steps to Update Galaxy S II GT I9100 With Pure Look S3 Custom ROM Firmware

• Download Pure Look S3 Custom ROM Firmware in your computer .
• Use USB cable and transfer all downloaded files to your Galaxy S II GT I9100
• Disconnect your device from computer.
• Enter In the recovery mode .
• After doing that install downloaded zip file and then choose the file that you have downloaded and transfer to your phone.
• Wait for installation and your screen starts flashing after that u will see  the button ++++Go Back++++ select it and then reboot your phone.

Hurrah!! you have successfully updated Galaxy S II GT I9100 With Pure Look S3 Custom ROM Firmware.

lg viper 4g lte

Disclaimer: This is to inform all the readers of this post that Nor the developer nor the website owner nor the person who has posted this article will not be responsible if your device or mobile get bricked during this installation update we do not bear any responsibility but we will try our level best to rectify your error.

Pre-requisite to root LG Viper 4G

• These steps that we are giving are only for LG Viper 4G you cannot use these steps on any other device, if you will use then your device or mobile will get bricked.
• The first thing you have to make sure is that your phone has to be charged at least 80 to 85% before you are doing this update or installation  otherwise your phone will switch off in between the installation or this update and this can cause a serious harm to yourdevice or mobile
• The second thing you have to make sure is to take a backup of all files, music, videos, photos, apps, call log, messages etc. in short take up the back up of whole Micro SD card.
• The third thing you have to make sure is to make a tick on enable USB Debugging on your Device or Mobile. If you don’t know how to Enable the USB Debugging follow these simple steps- Settings >> Applications >> Development >> USB debugging by following these steps your USB debugging would get enable.
• The fourth thing you have to make sure is to disable all the antivirus and kies because they willclutter in this installation or update.
• The fifth thing you have to make sure is all required drivers has to installed on your computeror laptop.
• By doing these five requirements correctly  you can go-ahead for the steps to install or update your device.

Steps to root LG Viper 4G

• Download |Microsoft latest Framework File and Super one click short fuse in your Computer.
• Now Extract the downloaded files into your Computer.
•  Now you have to connect your lg viper 4g to your computer with the help of USB.
• Now you have to just open the file Super one click short fuse and after opening you will see that button root press that button.
• Your lg viper 4g is rooted.
• After all this rooting process you have to update the Super one click.

Hurrah!! you have now learnt how to root lg viper 4g lte .